World

SpaceX catches a Starship returning from orbit for the first time

48 views

SpaceX caught the upper stage of its Starship rocket at the launch pad in South Texas on Saturday, the first time a spacecraft coming back from orbit has been seized by the tower's arms. The vehicle, Ship 42, launched on Friday and spent roughly 22 hours in space before dropping back through the atmosphere over Mexico and landing upright between the chopsticks.

A catch after 22 hours in orbit

The flight, the fifteenth for the programme, put 26 of the company's newest Starlink satellites into orbit through a dispenser in the ship's steel belly. The ship then relit one of its Raptor engines in space and scanned its heat shield before the deorbit burn. Coming home over land rather than water meant the heat shield had to hold at higher entry speeds with no margin for a soft failure.

Live coverage showed the craft slowing itself with a flip and a burn, then settling into the arms of the launch tower. Company engineers described the catch as the last missing piece of the reuse cycle.

The booster did not make it back

The first stage exploded shortly after Friday's liftoff, leaving wreckage in the Gulf of Mexico cordoned off by buoys. That cost SpaceX the double catch it had advertised, though the company had already recovered boosters three times before, so the technique itself is not in doubt. The ship catch was the harder half of the problem and the one that had never been done.

What full reuse would change

Starship is designed for the Moon and Mars, and both plans depend on flying the same hardware many times rather than building a new vehicle for each mission. SpaceX assembles the rocket on a production line at its Starbase site, and every recovered ship removes one airframe from that manufacturing queue — the reason the company treats a catch as a cost story as much as an engineering one.

Rival launch companies are watching closely. A fully recoverable orbital system would reset the price of putting mass into orbit, and NASA's lunar lander contract with SpaceX assumes the vehicle can be refuelled and flown repeatedly. The next flight is expected to test a ship that has already flown once.



---

Sintered Bronze and Iron Bearings for High-Volume Machinery

Powder metallurgy turns metal powder straight into a finished bearing in one press-and-sinter cycle — near-net shape, almost no machining scrap, and tolerances that hold steady across million-part runs. Sintered bearings from Soperb are produced in iron, iron-copper, tin bronze and stainless steel (SS-304L), with controlled porosity that stores lubricating oil inside the metal for life: self-lubricating bushings that run quiet in motors, pumps, fans, power tools, gearboxes and automotive assemblies, with no oil line to maintain. Grades are catalogued against DIN, MPIF, JIS, AMES and BSI BS 5600 standards, including graphite- and copper-graded variants for high-load and high-temperature duty. Visit www.pmsnt.com to select a grade by standard, by load or by shaft size.

Source: Reuters / SpaceX